Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC 2400 MAT R18 sw for IMX r11 COPY PASTE

Status
Not open for further replies.

grh959

Technical User
Nov 14, 2003
614
US
HI Guys

we are moving off of our NEC r11 2400. Short story - telco goofed the port and I have 200 numbers I have to call forward morning of cut. I know historically that the MAT software will not allow a way to paste numbers into the CFD window. Is there a hack or way around that? Looking to save time or not have to get up at zero dark 30 to cfd 200 numbers.
 
It is possible to write a script using VBA in excel using the sendkeys function to output the value of cells to the mat program but it is years since I had to do that. Also the sendkeys function is blocked these days and has to be allowed on your computer to work. There may be a newer way to do this but it has worked for me in the past. You have to move around the screen using tab and you need to pause between each entry as there is no handshaking but the solution does work and can be used in multiple cases. I once had to transfer 1000 speed dial entries between two Fujitsu 9600s and used this
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top