I am having some trunking issues and want to dial out specific trunks. I have found the access code for this under cmd LSPA. SID 17 is code "86". I dial 86, then trunk group (XXX), then Trunk (YYY) and get dial tone. I then proceed to dialing an outside number and get "Your call cannot be completed as dialed...". Am I doing this wrong?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC 2400 IPX Direct Trunk Dialing
- Thread starter sldaniel
- Start date
- Status
