Does anyone know the commands to look at DID number assignments and which stations they are pointed to, and how to add and delete the assignments. Newly inherited switch to this tech. Do the DID numbers have a virtual lens assigned? Where do I look up the actual spill coming from the telco and how it routes?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC 2400 Hospitality Pointing DID's
- Thread starter kacrane
- Start date
belevedere
Instructor
Try command ACDD. DID digit conversion. You will need to know the incoming DID route number.
Usually the extension and virtual extension numbers match to the incoming DID number range. If you need to convert a DID number to an existing extension or virtual then use ACDD to perform the conversion.
Usually the extension and virtual extension numbers match to the incoming DID number range. If you need to convert a DID number to an existing extension or virtual then use ACDD to perform the conversion.
- Status
