We had a NEC 2000 IVS phone system, and NEC Neaxmail AD-40 running on OS/2 warp that died hard.
We basically replaced the workstation with the same model Dell Optiplex G1, and recovered the hard drive.
However, the Neaxmail stops after Indexing Phrase Record, with "RSI (Re-direct with single introductory message) enabled" being the last text message on the startup. It doesn't load the banner page with the configuration options. We used a new hard drive, and performed a complete re-install, and it's doing the same thing.
We did a keydump, and the security key reports back just fine. The Dialogic analog 4 port cards downloads firmware, and report okay. I am totally stuck on why it's not starting up.
We basically replaced the workstation with the same model Dell Optiplex G1, and recovered the hard drive.
However, the Neaxmail stops after Indexing Phrase Record, with "RSI (Re-direct with single introductory message) enabled" being the last text message on the startup. It doesn't load the banner page with the configuration options. We used a new hard drive, and performed a complete re-install, and it's doing the same thing.
We did a keydump, and the security key reports back just fine. The Dialogic analog 4 port cards downloads firmware, and report okay. I am totally stuck on why it's not starting up.