I have a single analog phone set(eGenius Durafon 1x) - no Flash button (transfer) - you have to set a key on an Option Menu in order to transfer a call. My issue is, I don't know the transfer code or feature code that is set on my system. Is there anyone who can point me where to look?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEAX2400IPX 1
- Thread starter magugpo
- Start date
-
1
- #2
belevedere
Instructor
System feature access codes are in CMD ASPA, SID 43 = flash signal send. Usually, a quick tap on the hook switch gives you a flash. Too long and you hang up on the call.
- Thread starter
- #3
belevedere
Instructor
The list out is LSPA, but you will need a command manual to decode the SIDs. Try for manuals.
- Status