Neax2400 ipx Login failed

[Engr Rafiq]

Neax2400 ipx system is displaying "login failed (activation code certificate error(result= 0×02) & one-shot password is not assigned)". When attemp to login throw lan port with sv9500 gopro. System is running normally. Please advise.

 

[belevedere]

Is this a 2400 IPX or a SV 9500? If it's a SV 9500, then it no longer recognizes the registration code. You need to perform a one shot registration for temporary access, or re-register the system. You may need to contact your vendor for that.

 

[Engr Rafiq]

This is 2400 lpx & pcpro using for maintenance. System is running normally. Please give the steps for one-shot process. This one installed by us but no support locally for this 2400 model.
Will system run in next or for time period? Please advise

 

[Engr Rafiq]

I tried to one-shot pw but getting error shows failed. Can anyone suggest the way to recover? Also tried to activate code but shoes reading error