Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEAX 2400 ims/ipx Need to Connect Secondary CLK1 only Single Clock for Sync

Status
Not open for further replies.

WildBil

Technical User
Nov 10, 2016
37
US
Need little help with Finding Manual for TSW pl0 pl0-a only have CLK 0 and it is on Pair 8 L11 Cable possible upgraded from Neax 2400 ims/ipx to SV8500 But cables flip over to CPU002 Any Links or possible CLK1 pair 7 or 15
MOH R1 TIP 2 Split. Can't find Peripheral Equipment Manual for 2400 ims/ipx any help would be great!
Rather than shooting in dark
 
Peripheral manuals came out with the 8500 system. You may need an installation manual to find cross connects. You could also find it in a circuit card manual.
 
Thanks to all found what I needed in Circuit Cards but was in SV8500 Manual

thanks everyone for the Help great help everyone many thanks, Bill
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top