Neax 2000 IVS LEN Questions 1

[neaxtester2000]

When I install digital (4LCDQ) or analog cards (4LCD-A) depending on the slot. It gets 4 lens. IE digital card = LEN 0116, 0117, 0118, 0119. Well I installed a PN-AUCA card yesterday in slot LT13. This is a 2-line card. I assume it will use LEN 0120, and 0121. But what happens with the next card I install. If I install another PN-AUCA card in the next slot LT14, will it use LEN 0122 and 0123, or will it use 0124 and 0125. Or if I installed a 4 line card in slot LT14. Would it use will it use LEN 0122, 0123, 0124 and 0125, or will it use 0124, 0125, 0126 and 0127? I know this sounds dumb but I am just trying to clarify. Thanks

 

[pabxdude]

Hi;

Basically, think of LEN's as being hardwired to a slot. They dont move. Look in your command manual and you will see the face layout for a system. The way the LEN's are shown there is the way they always remain.

So if you use a 2 circuit card in a slot, the other LEN's that remain are not used, you skip to the next slot, and start programming the LEN's from there.

Thanks.