NDPS and Win XP Pro

[SuperDaveDCF]

Any of you guys have experience with XP Pro and NDPS?

Here's my issue:

I'm testing XP Pro on my workstation and I connect to a 5.1 sp3 server. I d/l the newest XP drivers from HP. When I attempt to install them into RMS on the Win2k tab I get an error that the .inf file is not valid. Novell TIDs say that the .inf file is written for both Win2k and XP platforms and apparently NDPS doesn't like this. I did install a printer manually and pointed it to the XP drivers I d/l to my workstation. The printer installed and has all the "normal" NDPS tabs in its properties but I only get about a 20% success rate on my print jobs.

 

[TheLad]

See if the following TID helps:

http://support.novell.com/cgi-bin/search/searchtid.cgi?/10068082.htm

Also, do you have NDPS installed as part of the NetWare Client installation? -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------

 

[SuperDaveDCF]

Thanks for the TID link as I hadn't seen that one yet. And yes, I am running 4.83 patched with the Workstation Manager, Remote Management and NDPS options.

 

[SuperDaveDCF]

Those suggestions didn't work for me. Here is the TID that seems to describe what is going on.

http://support.novell.com/cgi-bin/search/searchtid.cgi?/10070612.htm

They say the problem is with rmansrvr. The version shipped with sp3 is dated 5/14/01. I've applied the post-sp3 NDPS updates already and the version changed to 8/9/01. I have not applied sp4 which says the version should then be 11/20/01. I would assume that the above TID would say to just apply sp4 if it were that simple.