NCP500 in Canada with PRI?

[TomMonger]

Hello,

Our US company currently has an NCP500 system in our Toronto office. It currently uses 10 analog lines for incoming/outgoing calls. We would like to switch to PRI service.
My understanding is that in Canada, NI-1 is the protocol of choice for T1 and PRI service. If this is the case, can the NCP500 be configured to use NI-1, and if so, what is the proper port setting for the PRI card? Will "Euro ISDN Standard” or “UK Domestic” work?

Is there anything else I need to know before we proceed with this project?

Thanks,
-Tom in Scranton, PA

 

[Otoni]

You will need to crosscheck with your service provider for the following settings

OURS WORK WITH SETTINGS BELOW, YOUR MAY BE DIFFERENT

Network Type : 8 Euro ISDN (Standard)
Framing Type:
Line Coding (or Suppression):
Status Receive: Ignore
ISDN In/Out Call Type: Overlap
Clock Priority: 1-4E1
CRC4: Disable
ISDN Centrex: Enable
Trunk property: Public
Status message: When error Detection (Mandatory

http://www.wanetelecoms.com

 

[TomMonger]

Thanks for the reply, Otoni. Is this what you're using in Canada? With NI-1 protocol?

-Tom in Scranton, PA

 

[Otoni]

I am in Eastern Africa, NOT Canada.

We use British Standard.

Canada must be using American

http://www.wanetelecoms.com

 

[cwc3]

Canada follows North American Numbering plan ....