NCP500 and remote SIP extensions

[meanmofo]

Hi has anyone got a working solution for this setup?
Just been informed by Pana that their TGP500 SIP Cordless phones don't work with the NCP!
I am now currently testing a Siemens C47H without much luck.
Any help would be appreciated

 

[obtsystems]

Have you a sip licence?

I normaly use a pap box and a standard cordless phone, that way if they break the hand set it can be replaced with a standard unit

 

[meanmofo]

hi there
I have the license and was considering using a SPA2102 and a cordless for the three sites
would be good to get the 500 going for the PBX features

 

[meanmofo]

do you have a default config or cheat sheet i could have for the PAP.
It may just be a saviour!

 

[obtsystems]

the main thing is the sip server is the main IP address of the system. the user name and id is the extension number. password is as set by you on the vsipext card. every thing else is standard

 

[meanmofo]

tried that. But generally having all sorts of probs with customers net conn.
My understanding is
NCP> Set Ext + password port forward
SIP phone> Allocate ext + pw and point to global ip of NCP
Port fwd at mote site]
SIP ports different too!!
ie
15060
25060
35060
Where am I going wrong here?

 

[obtsystems]

You will need a VPN between the sites