alchemist777
Programmer
Hi thanks for reading - I need a bit of advice as a customer is setting up a vlan network with IP Extns and a IP trunk out to OZ via VPN. I need to send requirements for the set-up of their new Cisco switch's. The voice VLAN is 10
Do I need to request a trunked (tagged to vlan10 with access to VPN endpoint)port on the switch for DSP64's AND the MCP card? as they both have a IP Address and I think the MCP deals with RTP processing.
Any help or previous experience would be appreciated.
Independent Engineer
Avaya IP Office - ACSS, Panasonic and Samsung PBX's
Do I need to request a trunked (tagged to vlan10 with access to VPN endpoint)port on the switch for DSP64's AND the MCP card? as they both have a IP Address and I think the MCP deals with RTP processing.
Any help or previous experience would be appreciated.
Independent Engineer
Avaya IP Office - ACSS, Panasonic and Samsung PBX's