NCP and Ciscp SPA122

[bigglesnz11]

Has anyone set up the above combination?
Just aafter any hints or clues to any issues anyone may have had.
The ncp has SIP liscencing and we are looking at connecting a fax using the ATA at a remote site ( via a wireless pt to pt link , approx. 125 Mb/s link)

Cheers

 

[obtsystems]

They are straight forward to setup.

Create an extension and password and use the same in the pap. Use the main ip address on the ncp, not the ip card as reg server

As long as the latency is not too high on the wireless link, it should be ok