billazzollini
Technical User
how do I find out what my ncos Restrictions are?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ncos
- Thread starter billazzollini
- Start date
- Status
bigindian65
Technical User
prt your nctl in 87
Mato' Was'aka
Mato' Was'aka
it's really a multi step process.. after you print nctl to see what frl each ncos equals.. then look at your rlb's to see what frl is required to use each route list block..
if i point 9, nxx to rlb 1 and rlb 1 uses frl 1, nctl says frl 1 is =to ncos 1, then i can dial that nxx.. if i point all my locals to that route list block, all ncos 1 phones can dial any local.. if i point 9+npa to rlb 2 and use frl 3, if frl 3 is =2 ncos 3, all ncos 3 stations can dial that npa..
john poole
bellsouth business
columbia,sc
if i point 9, nxx to rlb 1 and rlb 1 uses frl 1, nctl says frl 1 is =to ncos 1, then i can dial that nxx.. if i point all my locals to that route list block, all ncos 1 phones can dial any local.. if i point 9+npa to rlb 2 and use frl 3, if frl 3 is =2 ncos 3, all ncos 3 stations can dial that npa..
john poole
bellsouth business
columbia,sc
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question
