NCOS 1 but use sys speed

[picklepowder]

How do I set up a type 500 phone with a NCOS of 1 but allow the phone to use a system speed dial list?
I have one set up but I don't understand what speed call list it is using. I think it has something to do with these settings:
FTR SCU 0080
FTR SSU 0006
FTR FDN 7000
How do I remove one or all of these FTR settings?

 

[coniglio]

SSU is system speed call user of list 6. what is the NCOS of this list?
SCU means this phone is a user of regular speed call list 80.
FDN means this phone forwards to x7000 on a no answer condition.
what is it you're trying to remove?

 

[StoneColdphoneman]

When you build system speed call list you assign Ncos to that list

Phone is using
SSU 0006 this stands for system speed user
That’s how phone access SSU 0006

To remove any thing under FTR just put X front of what you want to remove.

Sample

Ftr Xfdn this will remove fdn 7000

 

[picklepowder]

I do not want the analog phone to be able to dial outside calls. The only way they should be able to call outside is to use sys speed 0001. Here is how I have it setup but it doesn't work:
TN 016 0 00 09
TYPE 500
CDEN 4D
CUST 0
DN 260 0 MARP
CPND
NAME ROOM LABEL
XPLN 27
DISPLAY_FMT LAST,FIRST
AST NO
IAPG 0
HUNT 7000
TGAR 1
LDN NO
NCOS 2
SGRP 0
RNPG 88
XLST
SCI 0
CLS UNR DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRD CWD SWD PUA MWD LPD XHD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA
SHL ABDD CFHD
USRD BNRD OCBD RTDD FAXD FTTU
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR SSU 0001
DATE 3 FEB 2004

 

[coniglio]

are they dialing SPRE + 73?

 

[picklepowder]

YES