snailworks
Technical User
I cannot get internal paging to work to the phonesets. A user dials the paging extension (611) with no speakerphone output. Any suggestions an where to look for the problem / solution ???
-Gary
-Gary
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NBX 100 Inside paging
- Thread starter snailworks
- Start date
- Status
GoTellBigDaddy
Vendor
Soundz like you have the wrong numbers:
620, 621, 622 are what's in the default dial plan
620, 621, 622 are what's in the default dial plan
jdavissrusa
IS-IT--Management
Yep, if it isn't the wrong number, it is multi-casting. I have to buy new switches to allow paging.
The 3Com 4400 switch or equivalent does not support paging by default you have to disable IGMP Multicast filtering. The web config is the easiest way. I realize I'm assuming you have 3 Com switches but I know alot of people that buy phones an d switches as a bundled pair and have a hard time finding out this tiny bit of info.
In particular, you need to disable IGMP Snoop mode (unless you have a multicast router enabled and need to route NBX multicast to either remote IP phones, or another NBX via VTL's)
4400 command is br mu ig sno dis
1100/3300 is br mu ig dis
Robert Herrold CIO
Toll Free (866) NBX-HELP
4400 command is br mu ig sno dis
1100/3300 is br mu ig dis
Robert Herrold CIO
Toll Free (866) NBX-HELP
- Status
Similar threads