Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NAT ports and protocol

Status
Not open for further replies.
asserp

asserp

IS-IT--Management
May 2, 2001
3
FR
I want to create VPN (either PPTP or IPSec) with my firewall connected behind a 1401 DSL router.

How should I configure the incoming traffic for tcp port 1427, IP protocol 47 and udp port 500, IP protocol 50 and 51 to be forwarded from my external port to the IP address of my firewall connected to the Ethernet side of the router ?

eg :
ext router IP : 193.65.10.23 /24
int router IP : 172.16.1.254 /16
ext firewall IP : 172.16.1.1 /16

thanks for detailing the CISCO syntax.
 
Status
Not open for further replies.

Similar threads

BleuBell
  • Locked
  • Question
Command Rejected : Exceeded NNI ports Allowed
Replies
0
Views
142
BleuBell
BleuBell
Lccarter
  • Locked
  • Question
Cisco CUCM Provisioning and Order Management System
Replies
1
Views
241
Lccarter
Lccarter
acabezas2014
  • Locked
  • Question
Need to create QoS for SNMP and Radius traffic on Cisco 4948 Switches
Replies
0
Views
124
acabezas2014
acabezas2014
mrdom
  • Locked
  • Question
RV325: Accessing LAN and WAN resources using the same hostname ...
Replies
0
Views
133
mrdom
mrdom
netguy2000
  • Locked
  • Question
C2960TTL multiple Trunk ports with same VLAN
Replies
1
Views
138
chieftan
chieftan

Part and Inventory Search

Sponsor

Back
Top