NAT & ACL's on 3745 running 12.3 IOS

[wowhead]

I'm transfering a NAT statement from one router to another. I think I have the NAT statement figured out: ip nat inside source static x.x.x.x x.x.x.x

The ACL's I'm always leary of though. The host that is getting moved needs HTTP/HTTPS to travel outside to inside. This interface on the router though is the primary one every other host uses to get out to the Internet so I need to be careful with what I do. Assistance with the ACL would be appreciated. Thanks!

 

[jeter]

I'm confused! NAT functions are to translate public to private ip's. You can insert a command such as yours into the router but all thats going to do is forward the path to the inside address. This is not routing!!!

ip nat inside source static 222.222.222.222 192.168.1.222

Maybe a more detail example or diagram would help...


Go Army!
Tek-TIP Member 19,650