Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Names instead Extension number

Status
Not open for further replies.

32321111

Technical User
Nov 23, 2005
21
0
0
CA
Hi folks,

I have site1 and site2 both have their on system, that is connected by PRI.

When I call to a extension number between site some extensions I see Names and others I see only the extension number.

How can I enable the name to show between sites?

Thanks
 
check the ones that work against the ones that dont....and remember norstar techs help those who help themselves

"There are those who would make you believe there are no choices left.That they have the last word and its final.To those who try the world is wide open choices many.To those who dont only death awaits you.
 
There all the same.
only the target line is different. each fone has their own target line as PVT.

 
Have the extensions in question been programmed with a name instead of displaying their default DN?
 
I found the problem.

On of my sites is missing a CALLER ID ADAPTER. So because that a few calls show names and a few show numbers.

ps.: All my phones are set up with same settings
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top