Name Transmission over DPNSS Link

[PareshTC]

I have a Nortel CS1000E Rls 5.5 pbx talking to a Mitel 3300 switch over a DPNSS link within the same premises.

The problem I am facing is that the CPND display name is not working correctly,

- I can see name showing on incoming calls from the MITEL system but the Nortel PBX cannot use it to update the display of the called Nortel phone
- For calls from the Nortel to the Mitel system, no name information is seen on any of the messaging

I dont mind pasting the whole config for the DPNSS link, but if there are any obvious parameters to look for, please advise.

 

[Firebird Scrambler]

Have you checked out ROPT in LD 15.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.