nikhilwood
IS-IT--Management
The name of the person calling is not shown, only the extension number, can someone direct me in the right direction with the commands that allow name and number to show in 2000ips
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
name of the person calling is not shown, only the extension number
- Thread starter nikhilwood
- Start date
- Status
OzzieGeorge
Programmer
The first question is, have you entered the names into the system?
If not check out the FAQ here....
If the names are in the system then it is probably an 08 command try 08 de 255 de it should be a 1 also check 08 de 335 de again it should be a 1
If not check out the FAQ here....
If the names are in the system then it is probably an 08 command try 08 de 255 de it should be a 1 also check 08 de 335 de again it should be a 1
- Status
Similar threads
- Locked
- Question
- Locked
- Solved
- Locked
- Question