Name Display 2

[lsmyn]

m2616 I programmed keys with DID's and the matching Company name, so depending on which # is called, receptionist can answer in that company name when it is called.

But no name is appearing on the screen, the phone just rings??

DES FRNDSK
TN 007 0 00 00
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 7095
TGAR 15
LDN NO
NCOS 1
SGRP 0
RNPG 2
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBA WTA LPR PUA MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD OCBD FLXD FTTU MCBN
CPND_LANG ENG
RCO 0
HUNT 3565
LHK 2
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 3555 0 MARP
01 SCR 3631 0 MARP
CPND
NAME Law Ofc Mary Wittle
XPLN 24
DISPLAY_FMT FIRST,LAST
02 SCR 6528 0 MARP
CPND
NAME Pools Are Us
XPLN 24
DISPLAY_FMT FIRST,LAST
03 SCR 6529 0 MARP
CPND
NAME Bogan Muns & Muns
XPLN 24
DISPLAY_FMT FIRST,LAST
04 TRN
05 CFW 16 3565

 

[PMcCallum50]

You are welcome. Sorry I did not provide the total answer but as usual, everyone here is wonderful and with everyone's assistance, a solution (often several) are usually presented. This forum is FANTASTIC!

 

[lsmyn]

Thanks again, it is tremendous help. I am already learning more about our switch here than anywhere else !

Larry