Name Display

[lamasu]

Friends,

I may have asked this question before with out much success and the issue cae up again. Scenario : User on the phone on key zero and second call comes in on key one..user cannot see the caller id on the second call..any suggestions..

Thanks for your patience,
Lamasu

 

[EddieDuece]

Try TDD in the CLS

 

[Pudge99]

Set programming:
CLS - TDD

 

[lamasu]

Thanks friends, unfortunately no luck....

 

[EddieDuece]

Post the TNB.

 

[ccarmock]

Have you got Call Waiting defined on the set receiving the multiple calls?

 

[johnpoole]

post the tnb

john poole
bellsouth business
columbia,sc

 

[wolfi24]

What release dou you have ?

Wolfi

 

[lamasu]

ES 34355
TN 008 0 14 14
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM 0
FDN ####
TGAR 0
LDN NO
NCOS 5
SGRP 0
RNPG 67
SCI 0
SSU
LNRS 16
XLST 0
CLS UNR FBD WTA LPR PUA MTA FNA HTA TDD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG4
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRA DDV CNIA CDCA MSID DAPA BFED RCBD
ICDA CDMD MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTU MCBN
CPND_LANG ENG
RCO 0
HUNT ####
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 5194 5 MARP
CPND
NAME ######
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 6194 0 MARP
CPND
NAME ######
XPLN 27
DISPLAY_FMT FIRST,LAST
02 TRN
03 AO6
04 CFW 16
05 RNP
06 MWK ####
07
08
09
10
11
12
13 SCR 5013 0
CPND
NAME ###
XPLN 27
DISPLAY_FMT FIRST,LAST
14 SCR 6013 0
CPND
NAME ####
XPLN 27
DISPLAY_FMT FIRST,LAST
15
DATE 12 JUL 2006

 

[jamie2]

Is this on a PRI?

 

[jamie2]

Try changing your CLS - DNDA to DNDD

 

[johnpoole]

took a few minutes this morning and built a 2616 using just these cls marks from your tn

CNDA CDCA DNDA NAMA

tested once and got name display on key 1 when key 0 is busy. i thought it just ook the four plus default but use scripts so much i wanted to check.. those are the same 4 needed to remove a display for old 2008 non display if you want to use key 7 for mwk.. cndd cdcd dndd namd

john poole
bellsouth business
columbia,sc

 

[lamasu]

Thank you friend...will test and report back...Thanks again

 

[dogandbone]

TRY TDD IN THE CLS OF THE PHONE.



KEEP
ON
COMMUNICATING

 

[jakatz]

We attempted to do this too (I do not recall the outcome), but we did add a "DISPLAY" key to our sets (I beleive it was "KEY ## DSP"), which was supposed to allow us the ability to press that key while on a call and it would display the caller info for the incoming second line. Don't recall if it ever really worked though.

Anyone have any experience using this method? Feel free to chime in.

 

[NastyNed2]

In the posted tnb, what is the single digit that appears after the four digit dn?