Name Display Issue

[Jips1971]

Hi
I have a Meridian OPT 11 Phone system. The issue I have is with the name display.
On some phones it comes up OK when a caller rings in e.g. 'Stewart' but on others it come up as 'James:3904'

How do I stop the :3904 coming up on the affected ones?

 

[GHTROUT]

What do you see when you print the names in LD95?

Or when you print the TN out (where it shows the "name" on eack number)

[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too

 

[Jips1971]

I think I have sussed it. It looks to be the DES field on a LD20

Is there a way of keeping it blank. Examples Below

Displays 'STEWART:ICT'
DES ICT
TN 006 0 00 06
TYPE 3903
CDEN 8D
CUST 0
FDN
TGAR 1
LDN NO
NCOS 7
SGRP 0
RNPG 55
SCI 0
SSU 0010
XLST
SCPW
SFLT NO
CAC_MFC 0
CLS CTD FBD WTA LPR PUA MTD FND HTD TDD HFD GRLD CRPD STSD
MWD RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LND CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHD CLTD ASCD
ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHD IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD



Displays 'KATRINA'
DES 3904
TN 006 0 00 05
TYPE 3904
CDEN 8D
CUST 0
FDN
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 8
SCI 0
SSU 0010
XLST
SCPW
SFLT NO
CAC_MFC 0
CLS CTD FBD WTA LPR PUA MTD FND HTD TDD HFA GRLD CRPD STSD
MWD RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LND CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMA MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHD CLTD ASCD
ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHD IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD
CPND_LANG ENG



Displays 'JAMES:3904'
DES 3904
TN 005 0 00 10
TYPE 3904
CDEN 8D
CUST 0
FDN
TGAR 1
LDN NO
NCOS 7
SGRP 0
RNPG 55
SCI 0
SSU 0010
XLST
SCPW
SFLT NO
CAC_MFC 0
CLS CTD FBD WTA LPR PUA MTD FND HTD TDD HFA GRLD CRPD STSD
MWD RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LND CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHD CLTD ASCD
ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHD IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD
CPND_LANG ENG

 

[bhassell2000]

you can change the des by doing a change and entering x3904 to take 3904 out and see if that changes your name display

Thanks,

Buddy

 

[bigindian65]

DES cannot be left blank.

Mato' Was'aka

 

[bigindian65]

my bad. can not be left blank IF new.

Mato' Was'aka

 

[GHTROUT]

LD95
REQ PRT
TYPE CPND

Look for DES - notice response to DES

LD95
REQ CHG
TYPE CPND

Change DES to NO


[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too

 

[bigindian65]

lol, or it will say x3904....

Mato' Was'aka

 

[bhassell2000]

Really? My switches say yes in CPND in LD 95 and I don't have that DES attached to the name display. Is it becuase all of my stuff is still on 3.0 and complany won't pay to upgrade anyrhing?

Thanks,

Buddy

 

[PERRYPJ]

The DES option in LD 95 only applies to multiply DN appears

OLD ROLMEN WORKING ON NORTELS AND AVAYA