Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Name Display after upgrade

Status
Not open for further replies.
speedyboy

speedyboy

Vendor
Jan 14, 2005
10
US
I upgraded an Opt 11 to succession 3.0. Now all the phones say Nortel on the display. What LD can I change this in. I do not want anything to be on the display.
 
Sort by date Sort by votes
change in ld 17 in the PARM gateway.

print in ld 22 and you will see nortel.

You have to have the second level password to change.

Just change to one space stroke and it will blank it out.

or put in there "don't worry be happy"

John
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MoJHK
  • Locked
  • Question
Busy tone after hangup
Replies
1
Views
103
MoJHK
MoJHK
AShammah
  • Locked
  • Question
Spectralink/Nortel 2210/2211 Firmware upgrade
Replies
0
Views
102
AShammah
AShammah
MoJHK
  • Locked
  • Question
Nortel 2250 2/4 line display mode
Replies
1
Views
110
Firebird Scrambler
Firebird Scrambler
bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
106
bltodd
bltodd
bigdave1980
  • Locked
  • Question
Option 11 system problems after power disturbance
Replies
9
Views
191
bigdave1980
bigdave1980

Part and Inventory Search

Sponsor

Back
Top