NAM FAILURE

[sscott12345678]

i have a 8 port nam which has stopped operating. the yellow 'hard drive' light remains steady on the front panel. when i put a monitor on it to look at booting it stops and displays:

A:C: OS/2 !! SYS02025
OS/2 !! SYS02027

any suggestions on resolutions?

thanx!

 

[exsmogger]

Looks like a bad hard drive. You can either send it for repair, or upgrade to a Call Pilot, assuming your control unit software is R4.1 or higher

Brian Cox

 

[gforce9]

I found this doc on-line...

http://service5.boulder.ibm.com/psp...dc6f1f67b91441a2852561ac0076dd72?OpenDocument

 

[dgpcp]

My NAM failed once, fortunately i got the hard drive to read again, and cloned it to a brand new 80GB drive (the smallest IDE drive readily available). Works great! (I initially tried to get clever and make more partitions, but it didn't work so i'm still only using the first 6GB (the capacity of the old drive).