Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NAM 4.1 programing COS and connecting terminal

Status
Not open for further replies.

trclubb

Vendor
Mar 20, 2009
83
US
I need to change some options to a COS but do not have the codes. is there a way to connect thru HYPER ACCESS to make these. i have connected to serial port but does not come up with a login. also what could be the problem if FTR915 does not work
 
Once you are logged in F983 and in the MBOX menu COS settings can be changes by dialing 1. This is only available on the 4.1.

Or if there is a NIC card you can log in using Norstar Voicemail Manager (NVM)

I have seen 2nd level access (F915) be something different. You may have to hunt around or use Feature XFTEST to find it.

Marv ccna
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top