NAm 4.0 Press 8 for call transfer to cel phone

[wannabenorteltech]

I have a MICS 4.1, with a NAM 4.0 and a T1 with lines 24-13 in Pool A. The system is working great but the customer wants to be able to say "Hi this bob, I'm out of the office this week, to reach me on my cel phone press 8" from each mailbox. What programming do I need to do to make this happen.

Thanks

Wannabe

 

[mroberts]

To set up outdialing:
Feature 983, Log in 1020000 ok
Press MBOX
Press CHNG
Enter the maibox number
Hit next until you see
Outdial: None
PRess Pool
Dial 1 if using pool A, then ok, Accept: 1, press ok.
Dial 2 if using pool B, then ok, Accept: 1, press ok.

To CHANGE your outdial number

From your phone with the handset down in the cradle
Press FEATURE 981
PSWD: Enter your mailbox password
The screen will show:

0 new 0 saved
PLAY RECORD QUIT

On Your dial pad press 8 8
Your screen will show:

Transfer Dest:
(it will show the current number that is set up)
CHNG NEXT

Press CHNG
Screen will show:

Destination:
PHONE EXT

Press Phone to have the call go to an outside phone number. Press Ext if you want the call to do to an inside Extension.

Screen will show:

Ph:
RETRY OK

Using your dial pad dial the phone number you want the call to go to. IE., 555-1212. Dial it exactly as you would from your phone. Do NOT include access codes like 9.
Press OK when finished.

Screen will show:
5551212
ADD OK
Press OK

Screen will show:
Transfer: on
CHNG QUIT

You can hang up now.
MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.

 

[vegasnortel]

I beleive it's "please press 7 to be connected to my cell"