I have to print color on a polyester-based paper (Xerox Nevertear), and my 7700s run too fast - sometimes the toner smears due to incomplete fusing. I'm running on the cover stock (slow) setting and have installed the fuser temp upgrade. I want to slow them down by about 10%. Alternatively, I guess I could turn the fuser temp up a bit further but on all other papers they work great and I don't want to do that unless there is no other way. Does anyone know how to slow them down, either in the onboard software or mechanically? (Yes, I know Nevertear is not a supported substrate!)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
My Xerox 7700 runs too fast
- Thread starter richdude
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question