my system phone it ok for my business?

[Z71]

Hello

Hope you are well!

I would need some information in regards to what I need to install a MICS.
I have a MICS and I would like to install it in our shop
Here is the description of the kit.


NTBB41FB-93 X 1 Nortel Fiber Station Module 0x16

NTAB9865 X 1 Norstar CallPilot 100
NT5B82CK X 1 Software Mail Box

NTBB20FB Nortel 12 X 1 X 0 Fiber Trunk Module With NT5B41GA X1-93 4-Port Caller ID Trunk Card DS

NT7B53FA-93 Modular ICS X 1 Nortel 0x32 Key Service Unit
NTBB08GA-93 Norstar MICS NVRAM X 1 R1
NT7B66DQ X 1 Software for Phone System Version 6.1
NTBB02GA-93 X 1 2 Port Fiber Slim Expansion Cartridge
NT5B41GA-93 X 2 4-Port Caller ID Trunk Card DS


There is a sign on the module that resembles a phone and a kind of pole and line with a telephone and speaker, I am thinking this is the cable line and outs for individual stations? I currently have several telephones model number: Nt2n41aa114 (Bell Telephone) can these work with this system?

Also, there is a voice mail along with several plugs, 1, 2 and an Ethernet plug, where must I plug 1 and 2? And finally, I currently own a 110 Block Wiring Hub can I still use it with this system?


Thanks in advance for your time.


Z71

 

[norstarboy125]

Do you have any Norstar/Telecom experience? If not it's something that you just can wing it.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[silver987]

Sounds like a nice system but I agree with norstarboy125 That is not a job for a novice.

Wayne T