Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

My "Press 1 to....." went away? 1

Status
Not open for further replies.

ericturner

IS-IT--Management
May 18, 2007
49
US
So this morning I called my work ##, but instead of the normal recordings, it has a generic "enter extension" message. What gives? It was working the other day, nobody else makes any changes, and I didn't mess with anything
 
Even better, now all the options to the left are gone.

changes.JPG


I rebooted software - didnt work - and now the unified manager and all doesn't work. All lights on BCM are flashing except top 2 and bottom 2. I did a hard reset - same problem.

Is this a HDD error? Do I have to start from scratch again?
 
what system is it? i don't think its bad caps because you can access the callpilot, but it might be worth opening it up and looking.

bad capacitors = green
good = blue
 
Might this be the wrong Java Ver?




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top