Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MxOne and PIX 501 VPN

Status
Not open for further replies.

jensjuul

Programmer
Jul 28, 2007
50
DK
Hi

I have two 501 PIX and I have setup a static VPN connection between them. It works great on my computers - I'm able to connect through the VPN tunnel to the servers on both sides.

Now my company is trying to setup IP telephony. We have a MxOne and it's working when it is local traffic, but when we try to set it up through the VPN tunnel it does not work.

1.place <--> PIX 501 <--> Internet <--> PIX 501 <--> place 2

MxOne with IP phones
local IP phones Doesn't
(Works) work

Do I have to setup anything up in the PIX firewalls?

Thank you so very much!!
 
PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password *****
passwd ******
hostname ******
domain-name *******

fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names

access-lists... just simple access-lists between the PIXs

logging on
logging monitor debugging
logging trap informational
mtu outside 1500
mtu inside 1500

ip address outside ***.***.***.*** 255.255.255.252
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool TjaaTest 192.168.1.52-192.168.1.55

pdm info...

arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list no_nat
nat (inside) 1 172.16.1.0 255.255.255.0 0 0
nat (inside) 1 192.168.1.0 255.255.255.0 0 0

static info for access from outside..

access-group in-outside in interface outside
route outside 0.0.0.0 0.0.0.0 87.54.36.161 1
route inside 172.16.1.0 255.255.255.0 192.168.1.10 1
route inside 192.168.2.0 255.255.255.0 192.168.1.10 1
route inside 192.168.4.0 255.255.255.0 192.168.1.10 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3

aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
http 72.16.1.0 255.255.255.0 inside
http 80.166.90.50 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
...
vpngroup..
telnet..
ssh..


This is the side, where the MxOne is one, but the PIX are almost identical.

Do you see anything that shouldn't allow traffic/registration og the IP phones across the VPN tunnel?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top