Good afternoon,
I have a MX-ONE TSW SP8 and I'm with a great difficulty. He was asked to remove the external dial tone only a dest. Below the settings made.
RODAP :: ::
ROUTE DATA
VARC ROU TYPE VARI VARO FILTER
9 TL11 H'00000012 H'00000109 NO H'000000C5
ROCAP :: ::
ROUTE CATEGORY DATA
ROU SEL TRM SERV DIST DISL TRAF SIG NODG BCAP
9 0120000000000010 4 2100000000 0 30 128 0015 1514 011100000000 001100
RODDP :: ::
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
49 9 000500000000025000000000000 0 3 0
Note 1: The 11th digit of the VARO was changed to 'C' (No PTS-signal) and the first digit of this SIG '0 '. Thus after entering the dest (49) did not receive external dial tone in TDM extensions (analog and digital) however the IP extensions 5446 continues the External Dial Tone.
Note 2: Off all the Tone settings in config-file d44x01. And still no success.
Does anyone have a solution or is not really possible to remove this external dial tone devices in IP (H323)?
I have a MX-ONE TSW SP8 and I'm with a great difficulty. He was asked to remove the external dial tone only a dest. Below the settings made.
RODAP :: ::
ROUTE DATA
VARC ROU TYPE VARI VARO FILTER
9 TL11 H'00000012 H'00000109 NO H'000000C5
ROCAP :: ::
ROUTE CATEGORY DATA
ROU SEL TRM SERV DIST DISL TRAF SIG NODG BCAP
9 0120000000000010 4 2100000000 0 30 128 0015 1514 011100000000 001100
RODDP :: ::
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
49 9 000500000000025000000000000 0 3 0
Note 1: The 11th digit of the VARO was changed to 'C' (No PTS-signal) and the first digit of this SIG '0 '. Thus after entering the dest (49) did not receive external dial tone in TDM extensions (analog and digital) however the IP extensions 5446 continues the External Dial Tone.
Note 2: Off all the Tone settings in config-file d44x01. And still no success.
Does anyone have a solution or is not really possible to remove this external dial tone devices in IP (H323)?
