Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

mx-one sp 6

Status
Not open for further replies.

inlsp0x

Technical User
Jun 25, 2014
19
GB
hi;
i want to ask how can run day/ night automatic in tsw sp6 example 07am-14pm day and 14:01-6-59 night ?
2-how can initiate automatic backup :example every 12:00 am make external dump(dusyi)

gracias
 
alo to this config my tlu 76 is slave i need set tlu76 to master and make signal pri_net etc.
ROCAI:ROU=78,SEL=0110000000000010,SIG=211100000030,TRAF=03151515,TRM=4,SERV=3100000001,DIST=30,DISL=128,NODG=0,BCAP=111111;
RODAI:ROU=78,TYPE=SL60,VARI=10000000,VARO=04010020,VARC=00000300,FILTER=NO;@/EXECUTED/
 
1) Automatic what? Operator time can be adjusted (on/off duty) according to time/date. Also LCR. So pls be more specific.
Or maybe you want to switch the PBX off after 14pm?
2) DUFQI:date=,time=,int=; e.g dufqi:date=2014-01-09,time=12-00,int=24;, where the dump starts (1.time automatic) Sep 1st at 12, and does it every day.
3) ROCAI:ROU=78,SEL=0110000000000010,SIG=211100000031,TRAF=03151515,TRM=4,SERV=3110000001
RODAI:ROU=78,TYPE=SL60,VARI=15440000,VARO=06300020,VARC=00000310 (just by memory). VARO depends of the other party configuration in the private network.
 
hi
no set of i need pbx automatic switch night mode after 14:00pm and switch auto in day in 06:30 am
grasias
 
You can change night switch (TCD category) per day with OPDNC-
OPDNC:WDAY=SUN,DTIME=0630,NTIME=1400;
Repeat for all days of week changing time if appropriate (WDAY parameter each for SUN, MON, TUE, WED, THU, FRI and SAT)
Print table with
OPDNP;
NONE is a valid parameter for DTIME and NTIME if you want to turn the switching off for a particular day.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top