I have a MX-One 3.1 connected to a EBN/MDE through IP networking, i can make calls back and forth from the MDE/EBN to the MX-One and vise versa, i have analog trunks on the EBN/MDE, how can i configure the IP netowrking route to support making a call from the MX-One through IP networking and brake out through the analog trunks on the EBN/MDE?
my current ip networking settings:
rocai:rou=30,sel=7110000000000010,serv=3110000001,traf=03151515,sig=011110100091,bcap=111111,dist=30,disl=128;
rodai:rou=30,type=TL65,varc=00000011,vari=00000011,varo=00000000;
roeqi:rou=10,tru=1-1&&1-2;
roddi:dest=12,rou=1,adc=050510000000025000500000000,srt=1,ipadress=x.x.x.x,RROUID=“ebn1”;
To MD or not to MD that is the question
my current ip networking settings:
rocai:rou=30,sel=7110000000000010,serv=3110000001,traf=03151515,sig=011110100091,bcap=111111,dist=30,disl=128;
rodai:rou=30,type=TL65,varc=00000011,vari=00000011,varo=00000000;
roeqi:rou=10,tru=1-1&&1-2;
roddi:dest=12,rou=1,adc=050510000000025000500000000,srt=1,ipadress=x.x.x.x,RROUID=“ebn1”;
To MD or not to MD that is the question
