MX-One 3.1 Heartbeat HA

[TeleLion]

I had configured a 3 LIM node with one LIM for server redundancy and implemented network redundancy too, the SUSE on my LIM #2 crashed and the ESU will not boot up, so I used the turn key solution and built the LIM again, I used both restore_config, and repair LIM, both process will execute successfully, but LIM#2 will never join the system again, and the standby LIM is still acting as LIM#2, I don’t think there is any way of enabling the heartbeat and high availability on LIM#2 again since this is only done during the ts_startup phase !!!!!!!

To MD or not to MD that is the question

 

[drewMk2]

Have checked if the service node is running in the faulty
lim 2. /etc/init.d/eri_sn

if it is not try manually restarting it.

/etc/init.d/er_sn start