MX Controller unable to boot

[christiankarl]

Hi everyone, one of my 3300 is not booting it stuck on loading /partition1/Rtc8260 then hungs...


boot sequence:

boot device : ata=00
unit number : 0
processor number : 0
host name : bootHost
file name : /partition1/Rtc8260
inet on ethernet (e) : 192.168.180.10:ffffff00
host inet (h) : 192.168.1.187
gateway inet (g) : 192.168.180.1
user (u) : ftp
ftp password (pw) : ftp
flags (f) : 0x0
other (o) : motfcc


Disk Configuration Started.
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
Attaching to partition table for 4 partitions on controller 0 drive 0...
done.
Creating Cache Layer for partition 0 (/partition1) on controller 0 drive
0... do
ne.
Creating Cache Layer for partition 1 (/partition2) on controller 0 drive
0... do
ne.
Creating Cache Layer for partition 2 (/partition3) on controller 0 drive
0... do
ne.
Creating Cache Layer for partition 3 (/partition4) on controller 0 drive
0... do
ne.
Creating Dos FS device for partition 0 (/partition1) on controller 0 drive
0...
done.
Creating Dos FS device for partition 1 (/partition2) on controller 0 drive
0...
done.
Creating Dos FS device for partition 2 (/partition3) on controller 0 drive
0...
done.
Creating Dos FS device for partition 3 (/partition4) on controller 0 drive
0...
done.
Disk Configuration Complete.
Loading /partition1/Rtc8260...

 

[AH64Armament]

Do you have a backup? Do you have the software downloaded? Do you have the app record ID?

I recommend reloading the system. I would consider replacing the hard drive.

 

[IrwinMFletcher]

Try changing the bootline to /partition4/RTC8260

Looks like your HDD is dying. What is the background around the system? First time installing? Was it just upgraded? Or had it been up for some time? Why did it reboot? etc. etc.

 

[christiankarl]

thanks guys...sorry for late replies i already replaced the HDD and install OS then restore back-up.System is already working. About old HDD it's dead as in i can't detect it via pc troubleshoot...this hdd issue is very prone to mitel 3300 huh..this is my second time to replace hdd on different system so need to reserve more back-up hdd..