Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MWI through gateway

Status
Not open for further replies.
poopus

poopus

Technical User
Jan 18, 2007
50
US
I have an ESNA UC voice mail system that will not light the lights on any sets. The messaging is working on the CS1000, 7.6 , NRS with no problem. We do not have Session Manager. I am looking at a work around to use a Dialogic DMG1008DNIW digital gateway to route the MWI to the PBX. Does anyone see a problem with this hybrid set up? Any opinions would be greatly appreciated.

Thanks,
CWK
 
Status
Not open for further replies.

Similar threads

LPtelco
  • Locked
  • Question
Need command to turn off MWI lamp.
Replies
1
Views
101
jaxuser
jaxuser
nmcmo
  • Locked
  • Question
PRI issue with channels in MBSY state - Meridian Opt 11 and Cisco Voice Gateway (E1)
Replies
2
Views
109
nmcmo
nmcmo
bad69cat
  • Locked
  • Question
CallPilot not giving MWI
Replies
7
Views
82
bignose21
bignose21
jgbmt
  • Locked
  • Question
Moving ATT (legacy Pac Bell) PRI's to Cisco Gateway MGCP
Replies
12
Views
159
KCFLHRC
KCFLHRC
CommoGuy101
  • Locked
  • Question
Default gateway
Replies
2
Views
62
KCFLHRC
KCFLHRC

Part and Inventory Search

Sponsor

Back
Top