Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MWI on Qsig

Status
Not open for further replies.
MERIDIAN11C

MERIDIAN11C

Programmer
Mar 19, 2004
215
MX
hello
i have callpilot 4 and two op11c 4.5 and 4.0 with
pri`s and qsig
everytinhg works fine just the MWI on the remote site(4.0)
do not turns the lamp on
have on RCAP COLP NDI CCBI CCNI PRI DV3i CTI QMWI
in both sites
i read someting about a link between both PBX on ld 17

thanks
 
Status
Not open for further replies.

Similar threads

M1Guy
  • Locked
  • Question
Unable to add new user on CallPilot 5.0
Replies
1
Views
166
M1Guy
M1Guy
pmgr
  • Locked
  • Question
VOICEMAIL NOT WORKING ON NORTEL BCM50 PHONE SYSTEM
Replies
2
Views
155
Nortel4Ever
Nortel4Ever
datajockey123
  • Locked
  • Question
CAllPilot not working after removing one port to be used as a DN
Replies
2
Views
143
curlycord
curlycord
MooreTel
  • Locked
  • Question
CFNA answers ext calls, not internal on 3 ext's
Replies
4
Views
93
MooreTel
MooreTel
Jos.
  • Locked
  • Question
Is CallPilotBRU usable on Windows 10?
Replies
5
Views
111
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top