Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MWI on 3rd party IP dect cordless

Status
Not open for further replies.

JMC1

Technical User
Apr 13, 2022
8
CA
Hi,

I previously had this working, so I know it does, but it has stopped and I'm not sure why.

I am using a poly rove 30 ip dect phone with a B4 base and need the extension voicemail MWI to indicate a message is waiting, and also the huntgroup the extension is a part of.

Both V400 and H200 (ext and hunt group number) are in the source numbers.

I can't recall if I have to do anything else to make this work. The control unit I had this set up on (and working) is a test box and we used it for another job and when I brought it back and set this up again the mwi on the dect phones don't light up anymore.

Any suggestions as to where to look?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top