MWI Indicator

[whender]

Does anyone know if you can connect a device to a Nortel MICS or Call Pilot 100 to indicate an MWI had been turned on at a set?

tks

wayne

 

[allworxguy]

You'll have to elaborate on what you mean and what you're looking for.

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990

 

[curlycord]

So if somebody left me a message, my light turns on....you want to know that my light just went on?


=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[whender]

I have a group of five people who are in a hunt group. Not all five are present at all times. If a patient leaves a message, someone needs to check the voice mail without having to walk by the phone to see it has a message. I think I can only light two phones with message waiting. I was looking for some way to have an external display on the wall showing a message has been left for a phone or hunt group.

thanks

 

[curlycord]

From any phone:
Do F981, press OTHER, enter XXXZZZZ and press OK
XXX= DN
ZZZZ = Password.

What mailbox number is it? an HG member or the same DN as the HG?

Off Prem Notify to Internal might come in handy here.



=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[hawks]

You can also look here

http://www.algosolutions.com/soluti...ing/telephone-message-waiting-Indication.html

 

[whender]

outcall notification worked. I thought the nortel of the pasted called more than once...Am I mistaken?,,,,,is there anyway to have call notification more than one time.....

tks

 

[whender]

does callpilote interface allow more mwi ext than nvm...read doc...but could not really determine..

tks

 

[curlycord]

Callpilot 100/150 allows 2 DN's to have MWI where Callpilot on a BCM allows 5.
It's listed under admin of the mailbox/change "Alternate Ext".
Note that the phones you add must not already have a mailbox to get MWI form another set.

As for Off Prem Notify look at the Class Of Service chart in Setup and Operation.
You can edit a COS if need or choose a COS that works.





=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca