MW not working MD110 BC11

[tonfir]

Hi everyone
can you explain how could i fix MW problem in both digital (LED) and analog extension of MD110 BC11,the voice mail is working probably.
*Message waiting was working but now is not,no notification in analog EX and no indication in digital EX indicator.
Thanks,

 

[doktor]

Yes!
Make sure that the ICFUP; shows:
MESSAGE WAITING FUNCTION "ALL".
If it shows NONE, the no MWI will work.
To set it: ICFUC:MWF=ALL; or ICFUC:MWF=ALL,IFCIND=x;
Also check you messaging systems if the actually sends MWI.

///doktor

 

[tonfir]

this is the print out of ICFUP.
<ICFUP;
INFORMATION COMPUTER COMMON FUNCTIONS DATA
UPDATING START TIME IS 01:30
MESSAGE WAITING FUNCTIONALITY IS ALL
INFORMATION COMPUTER EQUIPMENT DATA
IFCIND IODEV EQU RATE DFMT UPDFCN PARITY CCHECK
0 NIUVM 5 YES
FILLER=32 ICEXG=NONE USER=NONE
END

the voice mail type is DIAVOX

 

[parnum]

Try a restart of units ILNP & MEW in the Lim.

as said, check the voicemail is sending MWI itself by looking at traces in voicemail and MD110.

best parnum

 

[doktor]

Also try a restart of FIP, MWP and NIP in the LIM, where the NIU is situated. A restart af DIM and DIR in the LIMs vhere these programs are situated, could also help.
Please post:
VMGEP;
VMPOP;
VMFUP;
IONPP;
IONCP;
IODDP;
Data for the lines to the Diavox system (EXDDP/EXCAP/group data).

///doktor

 

[tonfir]

thanks, and the information is bellow

<VMPOP:IFCIND=0;
VOICE MAIL PORT DATA
DIR PORT IFCIND
4801 04801 0
4802 04802 0
4803 04803 0
4804 04804 0
4805 04805 0
4806 04806 0
4807 04807 0
4808 04808 0
4809 04809 0
4810 04810 0
4811 04811 0
4812 04812 0
4813 04813 0
4814 04814 0
4815 04815 0
4816 04816 0
4817 04817 0
4818 04818 0
4819 04819 0
4820 04820 0
4821 04821 0
4822 04822 0
4823 04823 0
4824 04824 0
4825 04825 0
4826 04826 0
4827 04827 0
4828 04828 0
4829 04829 0
4830 04830 0
4831 04831 0
4832 04832 0
VOICE MAIL GROUP DATA
GRP IFCIND
4848 0
END
****************************************
<VMFUP:IFCIND=0;
VOICE MAIL FUNCTION DATA
IFCIND VMF POFMT
0 EXTN2 5
END
**********************************************

<EXCAPIR=4801;
EXTENSION CATEGORY FIELDS
DIR TRAF SERV CDIV ROC TRM ADC
4801 00010101 000202050 000130000 000001 0 000000000

**********************************************************************************
<EXDDPIR=4801;
EXTENSION DIRECTORY DATA
DIR CUST EQU CAT TYPE ICAT AUX
4801 003-2-60-08 1 EL6 0008

END

**************************************************************************************
<IONCP;
NETWORKING CONNECTION
NODE/IODEV LIM USER TYPE/CON IP PORT PROC
END
**********************************************************************************************

IODDP;
I/O DEVICE DATA

NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 SCSI/3 ADTX IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN SYSTERMINAL2 001-0-60-2 - MML - 7
SYSN MODEM 001-0-60-3 - MML - 7
SYSN SYSNET 001-0-60-4 - NETWORK/MML - 7
VM - 002-1-60 - - IN SERVICE
VM NIUVM 002-1-60-3 - OUT IN SERVICE
CIL - 003-1-60 - - IN SERVICE
CIL CILA100 003-1-60-2 - OUT IN SERVICE
END

 

[doktor]

Looks nice - from here.
What if you send the command ICUPI;.
If it says "UPDATING IS RUNNING" then locate the programs DIM and DIR and restart them.
This could be the problem.

Locate programs.
CNPIP:UNIT=DIM&DIR;

Restart programs:
RFPUI:UNIT=DIM,LIM=X;
RFPUI:UNIT=DIR,LIM=X;

Also post the ALLOP; and IOIFP;

///doktor

 

[tonfir]

The commend dose not work

ICUPI:IFCIND=0

ORDERED

TIME OUT WARNING

 

[doktor]

Then:

Locate programs.
CNPIP:UNIT=DIM&DIR;

Restart programs:
RFPUI:UNIT=DIM,LIM=X;
RFPUI:UNIT=DIR,LIM=X;



///doktor

 

[tonfir]

Many thanks.sorry for not replaying
after i send command ICUPI it gives me update is running and then DIVOX is restarted itself and the problem solved.
thanks again.