xzeneize10
IS-IT--Management
hello;
how to configure the bp250/50 to have 03 console operators.
thanks.
how to configure the bp250/50 to have 03 console operators.
thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mutliple operator consoles Bp250/50
- Thread starter xzeneize10
- Start date
- Status
With BMS
Features-> Operator -> Operator line position (4101) enter HW port of Operators (format ppiii, where pp=card number (01-63),iii=individual (001-031).
- Calls will be evenly distributed between Operators
- Only DBC 214/224 and DBC663 (try to avoid)
- Always connect Operator console on the first port of the Extension card
BR
Features-> Operator -> Operator line position (4101) enter HW port of Operators (format ppiii, where pp=card number (01-63),iii=individual (001-031).
- Calls will be evenly distributed between Operators
- Only DBC 214/224 and DBC663 (try to avoid)
- Always connect Operator console on the first port of the Extension card
BR
- Thread starter
- #3
- Status
Similar threads