Must remove translation on the board before changing circuit pack type

[Sal656]

Hi All

When I trying to reomve VAL-board ; I am getting an error stating that Must remove translation on the board before changing circuit pack type. so I run a command remove ip-interface 46A13, nothing shows up. Am I missing something here .... Thanks



change circuit-packs 46 Page 1 of 2
CIRCUIT PACKS

Cabinet: 46 Carrier: A
Cabinet Layout: G650-rack-mount-stack Carrier Type: G650-port

Slot Code Sf Mode Name Slot Code Sf Mode Name
00: 11:
01: 12:
02: 13: TN2501 VAL-ANNOUNCEMENT
03: 14:
04: 15:
05:
06:
07:
08:
09:
10:

'#' indicates circuit pack conflict.


" " Must remove translation on the board before changing circuit pack type

 

[smokinjoe2938]

display integrated will show you how many announcements and time left on board, next change announcements and remove them for there

 

[kyle555]

Depending on release, there may be a data module associated to it, but I think it means the actual announcements in CM that link to that board.

If you use audio groups, it could be easy enough to just take that board out of the group, but if you mapped individual announcements to it, I think that might be the cause of your grief.

 

[Sal656]

Thank you very much all