Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MultiTech RAS

Status
Not open for further replies.
jhowley58

jhowley58

Programmer
Jun 25, 2001
207
US
Hi,

I dial into a server via a multitech RAS finder connected to a cisco 801 router.

Just recently the following problem seems to be occuring:

I dial in and it seems to connect to the LAN OK - mostly at 26.4 kbits but sometimes at 28.8 kbits. But when I try to link to the actual server I get a message saying that the server cannot be reached etc. When it was working OK the connection speed was over 30 kbits/sec

Anybody got any ideas?

Thanks,

John.
 
Status
Not open for further replies.

Similar threads

dlancelot
  • Locked
  • Helpful tip
PPTP,RAS,VPN connection error 619 re: thread584-77613
Replies
0
Views
30
dlancelot
dlancelot
jbrusie
  • Locked
  • Question
MultiTech VOIP 210
Replies
5
Views
60
dhnl
dhnl
mvvilleza
  • Locked
  • Question
IBM8235 RAS w/ Radius Support
Replies
0
Views
42
mvvilleza
mvvilleza
DevPlan
  • Locked
  • Question
Can't ping LAN when connected over RAS
Replies
6
Views
54
dbredes
dbredes
rmpuk
  • Locked
  • Question
ISDN RAS error 651 -uplug cable fixes
Replies
2
Views
35
marshallmathers
marshallmathers

Part and Inventory Search

Sponsor

Back
Top