Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multitech ff240-IP and 2 SIP lines

Status
Not open for further replies.
capthoward

capthoward

IS-IT--Management
Dec 11, 2008
79
US
Hey guys, I've got a situation where I have a SIP provider connected to LAN1 and a Multitech FF240-IP(SIP Line) connected to LAN 2. The call comes in and I see it ringing on the faxfinder, but it never connects. It would appear that the faxfinder and SIP line are all set up properly according to the devconnect document, so I'm wondering if the issue could be something to do with routing between LAN 1 and LAN 2? LAN 1 is 192.168.42.1 and LAN 2 is 172.30.0.199. The faxfinder is 172.30.0.200. In SSA I can't ping LAN 1 from LAN 2 and vice versa, which led me to ask this question. Thanks for any guidance!
 
Status
Not open for further replies.

Similar threads

joestar
  • Locked
  • Question
Skype for Business (Lync) and IP Office SIP Integration
Replies
0
Views
244
joestar
joestar
tetratech
  • Locked
  • Question
2 SIP trunks with 911 Dialing
Replies
4
Views
350
tetratech
tetratech
somewacko2
  • Question
SIP Trunking and hunt groups
Replies
2
Views
247
Menniss
Menniss
Imran555
  • Locked
  • Question
Incoming caller ID with SIP server IP over SIP Trunks 1
Replies
1
Views
614
ipohead
ipohead
chavz7796
  • Question
Twilio SIP trunk setup on Avaya IP Office 9.0
Replies
3
Views
300
sizbut
sizbut

Part and Inventory Search

Sponsor

Back
Top