Multiple trunks to one Button on 2616 Set 1

[MonkAZ5]

Have 61C, I am looking into adding over 100 Ringdowns onto one button on a 2616 set. How would the programing look to do this? Also how would I be able to access the ringdowns for outgoing ringing? Will be using this in ACD environment.

Thanks

Mike

 

[johnpoole]

by using a speed dial list on an enhanced ring down. i perfer using 4 digit dn's to the analog ringdown..

if key 0 is scr 1000,, then the analog end would be

chg
500
cls mnl
ftr hot d 4 1000

you could still dial the dn on that or use a enhanced hot key on the 2616 and have a list of dn, with a index number. i don't see that as an advantage over a ssc.. a ssc for 99 phones is not really that much better then dialing the dn.. if i need to know station 2000 is ssc member 53, why not dial 2000? and still make the rings downs one way inbound

john poole
bellsouth business
columbia,sc

 

[MonkAZ5]

Thanks John,

Ring Downs are already in place existing on a 300 line modified 1A2 key system. (Have you seen one of them lately?) Will be moving them over to 61C. The ringdowns go out to Fire Stations, I want to number the ringdowns to the the station number, for instance Fire station 151 could become dn 2151. Also will have ACD for 911 Lines and Administrative lines coming in.

Mike

 

[johnpoole]

yes i worked on those lovely positron 911 key systems back in my sprint days, not much of a system.. those ring downs were controlled via centrex/essex service and were built in the dms 100, along with the ani/ali tables.. if these ringdowns are one way in, then mcr keys would be my choice. for outbound to the stations, your going to need enhanced hot lines.. build the numbers in an scl and give a hot key access... still not the best.. you can buy the 911 package for this product but i haven't installed one for that use..

john poole
bellsouth business
columbia,sc