I have set up several netscreen-remote clients to connect to a single subnet. Now I have a need to configure a netscreen-remote client to connect to multiple subnets behind an SSG. Generally, can someone point me in the right direction? I have read a lot of material, but I need some pointers. In the single subnet scenario, I can configure proxy-id of local and remote subnets and configure those respectively on the ns-remote side. What should be listed in the proxy area for remote and local for multiple subnets (or how should it be done) and what should be used on the remote side from an IP standpoint (of course, all phase 1 and phase 2 proposals will be required). Make sense? Any help is appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Multiple subnets behind SSG, need to access thru netscreen-remote
- Thread starter icmpman
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question