Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multiple simultaneous calls to IPO from SIP device failing after upgrade

Status
Not open for further replies.

ACSscott

Programmer
Jan 22, 2015
36
US
This is a tough one to search in the knowledgebase so I'm hoping someone here might have some direction from me.
A 500v2 r9.1 has a 2N IP Force doorphone connected with a 3rd party endpoint. The doorphone itself, when the button is pressed, makes multiple simultaneous calls to 6 extensions on the IP Office. This is done on the doorphone instead of a group in the IPO because the doorphone also screen pops video to the users' computers. This was working great.

After upgrading the IPO to 11.0.4, the doorphone can only call one extension simultaneously. I can see it attempting all 6 calls, but the first 5 are terminated by the IPO and the 6th goes through fine. If I only specify one recipient, that works fine. I can see the calls connecting in Monitor, then immediately disconnecting, and it almost looks like normal call clearing. Maybe I'm missing a filter I need to see the reason.

If anyone has insight, it would be greatly appreciated.
 
Have you tried putting one call from the doorphone to a group on the IpOffice?
 
That's actually what I have it doing now; that works fine and rings all the phones, since it's just one call from the doorphone. But, the customer needs it back to the previous configuration that was working in 9.1 so they can get video pop on all of the desktops. Still haven't found a solution for this nor what the change was in r11 that broke this.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top