Multiple Processors in EDC

[AlohaRoss]

I have a site. they want to use 2 different processors, 1 for the bar, a second for the restaurant. They are sepereate revenue centers already. Both use visanet, 1 is on heartland, the other on Tsys. In EDC ver 12 I have set boh up and they work fine. Listed as visanet and visanet2. When I setup FOH to use EDC index 2 in the terminals settings, it does not seem to make a difference and transactions still go out visanet and not visanet2. Is there something in the EDC.ini I need to add to assign different PINDEX numbers for the same processor. In the AutoSettle documentation I have it refers to Doc ID 6261. If someone can tell me what this document has to say that would be great.

AlohaRoss

http://www.needaholahelp.com

3rd Party support

 

[AlohaRoss]

Well after doing some research here is the answer
I needed to add INDEX=1', 'INDEX=2 to the terminal setup where it asks for EDC. Usually this is left blank. I now have 2 terms in the bar processing through tysy, while restaurant on other side uses heartland for the other 4 terms. To settle cards they have to choose each of them 1 at a time.

also had to add this to EDC.ini
MULTIPLEMERCHANTIDS=[highlight #FCE94F]TRUE[/highlight]

AlohaRoss

http://www.needaholahelp.com

3rd Party support